Synthesis,Characterization, DNA Binding,Light Switch “On and Off”, Docking Studies and Cytotoxicity,of Ruthenium(II) and Cobalt(III) Polypyridyl Complexes

The novel ligand (dmbip) 2-(4-N, N-dimethylbenzenamine)1H-imidazo[4, 5-f][1, 10]phenanthroline and its complexes [Ru(phen)₂dmbip]²⁺ (1), [Ru(bpy)₂dmbip]²⁺ (2), [Co(phen)₂dmbip]³⁺ (3) and [Co(bpy)₂dmbip]³⁺ (4) [where phen?=?1, 10-phenanthroline, bpy?=?2, 2^′-bipyridine], have been synthesized and characterized by elemental analysis, IR, UV-Vis, ¹H NMR, ¹³C NMR and Mass spectra. The DNA binding properties of the complexes were investigated by absorption, emission, quenching studies, light switch “on and off”, salt dependent, sensor (cation and anion) studies, viscosity measurements, cyclic voltammetry, molecular modeling and docking studies. The four complexes were screened for Photo cleavage of pBR322 DNA, antimicrobial activity and cytotoxicity. The experimental results indicate that the four complexes can intercalate into DNA base pairs. The DNA-binding affinities of these complexes follow the order [Ru(phen)₂dmbip]²⁺ > [Co(phen)₂dmbip]³⁺ > [Ru(bpy)₂dmbip]²⁺ > [Co(bpy)₂dmbip]³⁺.     

Synthesis and Antioxidant Activity of Bis‐oxazolyl/thiazolyl/imidazolyl 1,3,4‐Oxadiazoles and 1,3,4‐Thiadiazoles

A variety of symmetrical trisheterocycles bis‐oxazolyl/thiazolyl/imidazolylacetamido‐sulfonylmethyl 1,3,4‐oxadiazoles and 1,3,4‐thiadiazoles was prepared, and their antioxidant activity was studied. The compounds bisoxazolyl oxadiazole and bisoxazolyl thiadiazole having methyl substituent on the aromatic ring exhibited greater antioxidant activity than the standard ascorbic acid.     

In situ preparation of polymeric cobalt phthalocyanine–decorated TiO2 nanorods for efficient photocatalytic CO2 reduction

The integration of photosensitizers with low-cost and non-toxic metal oxides is a promising strategy to design heterogeneous photocatalysts for CO₂ reduction. Herein, p–n heterojunction photocatalysts (T-CoPPcs) consisting of p-type polymeric cobalt phthalocyanines (CoPPcs) as a photosensitizer coupled with n-type TiO₂ nanorods were fabricated through a facile, eco-friendly, one-pot hydrothermal reaction. In this process, CoPPcs were grown on n-type TiO₂ nanorods, whereas protonated titanate nanorods began converting to the highly crystalline anatase phase with small crystals on the TiO₂ surfaces. The introduction of CoPPcs not only improved the solar light utilization but also accelerated the separation and migration of charge carriers via the p–n heterojunction with the strong interfacial contact Ti–O–Co bond. The increases in crystallinity and surface area of TiO₂ nanorods also contributed to the enhanced photoactivities of T-CoPPcs. The CO₂ photoreduction of the synthesized materials was evaluated in CO₂-saturated MeCN/water using [Co(bpy)₃]²⁺ as a cocatalyst and triethanolamine as a hole scavenger. The optimized nanocomposite exhibited a remarkable CO generation rate of 4.42 mmol/h/g with a high selectivity of 85.3% and outstanding catalytic stability. The influences of cocatalyst concentration, water content, catalyst loading, and hole scavenger concentration were optimized for efficient CO₂ reduction. The photocatalytic CO₂ conversion efficiency of the present system is found to be higher than that of TiO₂-based materials reported in the literature. We believe that this research into a heterostructural design strategy and photocatalytic system may be an inspiration for the development of photocatalytic CO₂-to-CO conversion.     

Design,synthesis of (Z)‐3‐benzyl‐5‐((1‐phenyl‐3‐(3‐((1‐ substituted phenyl‐1H‐1,2,3‐triazol‐4‐yl)methoxy)phenyl)‐1H‐pyrazol‐4‐yl)methylene)thiazolidine‐2,4‐dione analogues as potential cytotoxic agents

In an attempt to achieve promising cytotoxic agents, a series of new (Z)‐3‐benzyl‐5‐((1‐phenyl‐3‐(3‐((1‐substituted phenyl‐1H‐1,2,3‐triazol‐4‐yl)methoxy)phenyl)‐1H‐pyrazol‐4‐yl)methylene)thiazolidine‐2,4‐diones 10 a‐n were designed, synthesized, and characterized by ¹H NMR, ¹³C NMR, IR, and ESI‐MS techniques. These compounds synthesized from appropriate reaction procedures with better yields. All the novel synthesized compounds 10a‐n were evaluated for their cytotoxic activity against the MCF‐7 cell line (Human breast cancer cell line) at different concentrations of 0.625, 1.25, 2.5, 5, and 10 μM, respectively. The cytotoxic evaluation assay is presented in terms of IC₅₀ values and percentage cell viability reduction compared against standard drug cisplatin. Among all novel synthesized compounds 10a‐n , some of the representative analogues particularly 10g and 10e exhibit remarkable cytotoxic activity with IC₅₀ values 0.454 and 0.586 μM, comparable to that of the standard drug cisplatin, and some analogues 10d , 10f , 10k, and 10m also have shown significant activity.     

Butyrolactones from Aspergillus terreus

In the process development of lovastatin using Aspergillus terreus DRCC 152 in solid state fermentation, we have isolated a new butyrolactone-IV (3) along with the previously reported butyrolactone-I (1) and butyrolactone-II (2) produced under submerged conditions. The structure of compound 3 has been characterized as 3-hydroxy-5-[2-(1-hydroxy-1-methylethyl)-2(R)-2,3-dihydro-benzo[b]furan- 5 ylmethyl]-4-(4-hydroxyphenyl)-5-methoxycarbonyl-(5R)-2,5-dihydro-2 -furanone on the basis of spectroscopic studies. The absolute stereochemistry has been determined by single crystal X-ray diffraction studies. The cytotoxic and antibacterial activities of these compounds were determined.     

Design and synthesis of novel (Z)-5-((1,3-diphenyl-1H-pyrazol-4-yl)methylene)-3-((1-substituted phenyl-1H-1,2,3-triazol-4-yl)methyl)thiazolidine-2,4-diones: a potential cytotoxic scaffolds and their molecular modeling studies

In an effort to discover potential cytotoxic agents, a series of novel (Z)-5-((1,3-diphenyl-1H-pyrazol-4-yl)methylene)-3-((1-substituted phenyl-1H-1,2,3-triazol-4-yl)methyl)thiazolidine-2,4-dione derivatives (8a–n) were designed and synthesized in various steps with acceptable reaction procedures with quantitative yields and characterized by ¹H NMR, ¹³C NMR, IR, HRMS and ESI–MS spectra. These newly synthesized novel derivatives were screened for their in vitro cell viability/cytotoxic studies against human breast cancer cell line (MCF-7) with various concentrations of 0.625 µM, 1.25 µM, 2.5 µM, 5 µM and 10 µM, respectively. The biological interpretation assay outcome was demonstrated in terms of cell viability percentage reduction and IC₅₀ values against standard reference drug cisplatin. Based on these results, most of the derivatives exhibited promising cytotoxic activity. Among them, particularly compounds 8j (R₁?=?OMe and R₃?=?NO₂) and 8e (R₃?=?CF₃) demonstrate remarkable cytotoxic activity with IC₅₀ values 0.426 µM?±?0.455 and 0.608 µM?±?0.408, which are even better than the standard drug cisplatin 0.636 µM?±?0.458 and compounds 8m (R₂?=?OMe and R₃?=?OMe) and 8c (R₃?=?OMe) exhibited closely equivalent IC₅₀ values to the standard drug with IC₅₀ values 0.95 µM?±?0.32 and 0.976 µM?±?0.313 and rest of the compounds exhibits moderate cytotoxic activity. Moreover, molecular modeling studies and ADME calculations of the novel synthesized derivatives are in adequate consent with the pharmacological screening results.

     

One pot,single step,room temperature dielectrophoretic deposition of gold nanoparticles clusters on polyethylene terephthalate substrate

The major challenge of plastic electronics is the deposition of gold nanoparticles (AuNPs) on flexible substrates at room temperature. Here, we show fast, single step, room temperature deposition of AuNPs on polyethylene terephthalate (PET) and biaxially oriented PET (BoPET) substrate by employing dielectrophoresis. The deposition has been carried out using two‐electrode system, with BoPET (or PET) and metallic (Pt or stain steel) mesh, under an AC signal of 20 kHz and 20 V peak‐to‐peak (V_pp) (signal for PET is 6 V_pp and 6 kHz). In this method, we show how to deposit AuNPs on PET‐like insulator by exploiting its polarization capability under an AC signal. The polarization of PET has been confirmed by change in the Raman spectra of the PET film under in situ AC signals. Furthermore, we show that using this dielectrophoretic deposition method, the PET films can be patterned by AuNPs at room temperature without any pre‐ and posttreatment.     

Novel Synthesis and Structures of Amines and Triazole-Derived Glycoside and Nucleoside Derivatives of Phosphanyl Sugar Analogs

ABSTRACT

3-Methyl-1-phenyl-2-phospholene and 1-phenyl-2-phospholene 1-oxides were converted into 2-bromo-3-hydroxy-3-methyl-1-phenylphospholane and 2-bromo-3-hydroxy-1-phenylphospholane 1-oxide (1-bromo-1,3,4-trideoxy-1,4-C-[(R, S)-phenylphosphinylidene]-glycero-tetrofuranose) by the action of bromine in aqueous medium. The bromo substituent of the phospholane was substituted by treatment with amines or an azide anion to afford novel glycoside derivatives of phosphanyl sugar analogs such as 2-amino-3-hydroxy-1-phenylphospholane (3,4-dideoxy-1,4-C-[(R, S)-phenylphosphinylidene]-glycero-tetrofuranosylamine) and 2-azido-3-hydroxy-3-methyl-1-phenylphospholane 1-oxides with retention of the configuration. The 1,3-dipolar cycloaddition of the 2-azido derivative of the phospholane with alkynes gave 3-hydroxy-3-methyl-1-phenyl-2-(triazol-1′-y1)phospholane 1-oxides as a novel triazole-derived nucleoside of phosphanyl sugar analogs. The structure of the glycoside and nucleoside derivatives of the phosphanyl sugar analogs prepared was deterimined from IR, NMR, and X-ray crystallography analysis.